Urinalysis Reagent Strips

Intended Use

Urinalysis Reagent Strips are made for urinalysis of both qualitative and semi-quantitative, whichare in vitro reagent for diagnostics. It tests Leukocytes, Nitrite, Urobilinogen, Protein, pH, Blood, Specific Gravity, Ascorbic Acid, Ketone, Bilirubin, Glucose, Microalbumin in urine. Please refer to the out-side box and bottle label for the specific test parameters of the product you are using.

Please read this direction carefully before using Urinalysis Reagent Strips.

The results on the strips can be read visually and instrumentally.

Specifications

100 strips/bottle

Specimen Collection and Preparation

Use only clean dry container to collect urine and should be shocked before testing and test it within 2 hours. Any operations must be in the sanitary environment.

Attention

Water cannot be used as negative quality control liquid. Antiseptic of urine cannot prevent the ketone, bilirubin and urobilinogen from deteriorated. For the long time urine specimen, the test results of glucose, pH, nitrite and blood can be affected cause of bacterial growth.

Test Procedure

1. Remove one strip from the bottle and replace the cap immediately.

2. Immerse the reagent area of the strip in the urine specimen and take it out quickly.

3. Wipe off excess urine against the rim of the specimen container.

4. Read the test results carefully within 60 seconds in a good light and with the test area held near the appropriate color chart on the bottle label. Changes in color that appear only along the edges of the test pads or after moving than 2 minutes have passed are of no diagnostic significance. Results with leukocytes test portion can be read within 120 seconds.

If reading instrumentally, carefully follow the directions given in the appropriate instrument operating manual.

Hot Tags: urinalysis reagent strips, China, suppliers, manufacturers, factory, bulk, Urinalysis Reagent Strips, Gamma Hydroxybutyric Acid Test, Urine Adulteration Test, Vaginal PH Test, Alcohol Rapid Test